• fx-pro-range
  • fx-pro-range

01 Architectural Coatings

FX PRO First Coat 20L

Available Sizes:

Clear selection

Product Description

FX PRO First Coat, a 100% acrylic coating specifically formulated to seal all new plasterboard surfaces, is a trade professional favourite. It provides an excellent base for further FX PRO coatings, and is the cost-effective, no-fuss choice for everyday painting jobs.


  • Water Based
  • Tintable

  • Ease of application
  • Easy spreading
  • Easy clean-up
FX PRO First Coat is specifically formulated to seal all new interior surfaces, such as cement-based substrates, plasterboard surfaces, ceilings, eaves, partitions, cornices and other decorative trims. It is also suitable for sheltered exterior surfaces such as eaves.

Surface Preparation
All surfaces must be thoroughly cleaned and free of dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth. Then apply FX Pro First Coat as required, one coat minimum.

Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.

Brush/Roller: Apply product using a 75 mm–100 mm brush or medium or long nap roller.

Airless/Conventional Spray: Suitable for application using all standard spray equipment. Up to 10% water per litre may be added to aid atomisation.

Approximate Spreading Rate: 13 square metres per litre, depending on application technique and surface roughness.

Approximate Film Thickness per coat: Wet: 90 Microns; Dry: 25 Microns.

Requires: 1–2 coats.

Thinner: Water, up to 10% if required.

Tinting: Refer to colour chart for tinting specifications.

Method: Brush, roller or airless/conventional spray equipment.

Drying Times (at 25 °C): Touch: 30 Minutes; Recoat: 4 Hours.

Additional Information

Weight 29 kg
Dimensions 300 x 300 x 400 cm
Tint Options

Un-tinted (White)