FX Wicked Wax® & FX Liquid Wax
FX Wicked Wax® and FX Liquid W
x are specifically formulated to dramatically highlight the patterns and textures of
FX Stucco coatings, FX Marmorino and FX Travertino®, producing varied creative finishes. These wax products are also
used to protect FX Stucco coatings against wear and moisture in high traffic areas. FX Liquid Wax, tinted or untinted, is
also ideal to create a French Provincial look on furniture pieces when used over FX Milk Paint.
Ease of application
FX Wicked Wax® and FX Liquid W
x are ideal for adding further creative effects to FX Stucco, FX Marmorino and
FX Travertino® coatings, and protecting these finishes.
Before applying FX Wicked Wax® or FX Liquid W
x over base FX Stucco, FX Marmorino or FX Travertino® coat, ensure the
surface is free of dirt and dust. There should be no grease or stains. Any efflorescence or mould should have been
treated beforehand at the initial preparation stages before applying FX Stucco Undercoat. See appropriate FX Product
Place a small amount of wax (the size of a twenty cent coin) onto the centre of a stainless steel trowel. Move trowel
over the surface leaving a fine film of wax on the sur
ace. Then go back over the area with a clean trowel, removing
any unwanted or excess wax, and burnishing the surface. Work one square metre area at a time. Once satisfied that
the area is waxed correctly, allow to dry completely. Then polish with a clean white rag or lamb’s wool buffer.
Place a small amount of FX Liquid Wax onto a clean white rag. Apply product in a circular motion. As the liquid wax
penetrates the surface, continue to buff with the rag or alternatively, wait until the wax is completely dry then polish
with a lamb’s wool buffer.
Not suitable for use with spray equipment.
: 15–20 square metres per litre/kg;
: depends on application
technique and surface roughness.
1 coat for a simple wax finish.
: Not required.
: Both products may be tinted. Refer to colour chart for tinting specification.
: clean white cotton rag.
(at 25 °C)
If required, 12–24 Hours.
: 20%–30% at a 60° viewing angle after polishing.
Wear eye protection and dust mask when spraying, as splashes may cause eye irritation and inhalation of spray
mist may cause respiratory irritation.
Do not disturb, sand or scrub, and avoid any peripheral dust. If you do not have professional expertise
in handling/removal of asbestos sheeting, use a licensed asbestos removalist.
Refer to product labels, current FX Australia Safety Data Sheets or call FX Australia for detailed information.
Slippery when spilled
Restrict access to area until clean-up is completed
When cleaning up spills, use personal protection
Stop leak if safe to do so and contain spill with absorbent material such as sand, ver
iculite or other inert material
Prevent spill from entering waterways
Collect and dispose of spilled material according to local regulations
Wash away remnants
with liberal amounts of cold water.
FX Australia Pty Ltd | ABN: 75 089 071 385 | 86 Redfern Street, Wetherill Park NSW 2164 Australia
T +61 2 9725 5888 | F +61 2 9757 2688 | E
| W www.fxaustralia.com.au