FX Australia® Product Information
Product Description
FX MAX Ceiling Flat
(Interior only)
FX MAX Ceiling Flat is a premium, flat, white 100% acrylic coating, specifically formulated to hide ceiling imperfections.
It guarantees maximum coverage and intensity, minimising the time and work required to give a brilliant finish to both
new and repaint applications.
Features
Benefits
Water-based
Ease of application
Brilliant white
Easy spreading
Tintable
Uses
Easy clean-up
FX MAX Ceiling Flat is ideal for interior surfaces such as plaster, plasterboard, iron and cement render. It is also suitable
for sheltered exterior surfaces such as eaves.
Surface Preparation
All surfaces must be thoroughly cleaned and free of dirt, dust, grease, loose or flaking paint, and loose surface plaster.
Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding
and wipe clean with a damp cloth. Then apply FX MAX Superprep as required, one coat minimum.
Application
Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.
Brush/Roller: Apply product using a 75 mm–100 mm brush, or medium or long nap roller.
Airless/Conventional Spray: Suitable for application using all standard spray equipment. Up to 10% water per litre may
be added to aid atomisation.
Approximate Spreading Rate: 13 square metres per litre, depending on application technique and surface roughness.
Approximate Film Thickness per coat: Wet: 90 Microns; Dry: 25 Microns.
Requires: 2 coats.
Thinner: Water, up to 100 ml water per litre if required.
Tinting: Usually untinted for a brilliant white, tintable if required. Refer to colour chart for tinting specifications.
Method: Brush, roller or airless/conventional spray equipment.
Drying Times (at 25 °C): Touch: 30 Minutes; Recoat: 4 Hours.
Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C.
The temperature should not fall below 10 °C during the drying process.
Clean-up: Water. Safety: Dust Mask. Gloss Level: Less than 5% at a 60° viewing angle.
Safety and Environmental Care
Safety
Personal Protection: Wear eye protection and dust mask when spraying, as splashes may cause eye irritation and inhalation of spray
mist may cause respiratory irritation.
Asbestos cement sheeting: Do not disturb, sand or scrub, and avoid any peripheral dust. If you do not have professional expertise in the
handling/removal of asbestos sheeting, use a licensed asbestos removalist.
Refer to product labels, current FX Australia Safety Data Sheets or call FX Australia for detailed information.
Clean-up
Slippery when spilled· Restrict access to area until clean-up is completed · When cleaning up spills, use personal protection
equipment · Stop leak if safe to do so and contain spill with absorbent material such as sand, vermiculite or other inert material ·
Prevent spill from entering waterways · Collect and dispose of spilled material according to local regulations · Wash away remnants
with liberal amounts of cold water.
FX Australia Pty Ltd | ABN: 75 089 071 385 | 86 Redfern Street, Wetherill Park NSW 2164 Australia
T +61 2 9725 5888 | F +61 2 9757 2688 | E sanvito@fxaustralia.com.au | W www.fxaustralia.com.au
Storage
Store in a cool, dry, well-ventilated place out of direct sunlight · Store away from strong acids and moisture · Keep containers closed
at all times and check regularly for spills.
Disposal
Refer to State/Territory Land Waste Management Authority: most authorities permit disposal at approved land waste sites.
Date of Issue: March 2014
FX Australia Pty Ltd | ABN: 75 089 071 385 | 86 Redfern Street, Wetherill Park NSW 2164 Australia
T +61 2 9725 5888 | F +61 2 9757 2688 | E sanvito@fxaustralia.com.au | W www.fxaustralia.com.au