FX Lemon Tree Creek® Ceiling Flat
FX Lemon Tree Creek® Ceiling Flat is a high-performance, hard-wearing interior and exterior acrylic coating specifically
formulated for use in all domestic and commercial situations where environmental safety and peace of mind are
paramount. It incorporates advanced molecular sieve technology to absorb odours and toxins, is APEO-free* and VOC-
free** and is developed for ease of application and superior durability.
Ease of application
Molecular Sieve Technology
Safeguarding your environment
FX Lemon Tree Creek® Ceiling Flat is ideal for sealed interior surfaces, such as plaster
plasterboard and cement.
All surfaces must be thoroughly cleaned and free of dirt, dust, grease, loose or flaking paint, and loose sur
Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss sur
aces, by thoroughly sanding
and wipe clean with a damp cloth. Then apply FX Lemon Tree Creek® Sealer Undercoat as required.
Stir contents thoroughly before and during use with a broad, flat stirrer
using an upward action.
Apply product with a 75 mm–100 mm brush, or using a medium or long nap roller.
Suitable for application using all standard spray equipment. Up to 10% water per litre may
be added to aid atomisation.
13 square metres per litre depending on application technique and surface roughness.
If required, add up to 100 ml of water per litre to assist in application.
Refer to colour chart for tinting specifications.
Brush, roller or airless/conventional spray equipment.
(at 25 °C):
: Less than 5% at a 60° viewing angle.
*APEO-free: APEOs (Alkylphenol ethoxylates) are non-ionic surfactants with an emulsifying and dispersing action, known
for their poor biodegradability and toxicity, especially to marine life.
**VOC-free: VOCs (V
latile Organic Compounds) are chemical compounds that vaporise and enter the air
contributing to inside and outside air pollution.
Wear eye protection and dust mask when spraying, as splashes may cause eye irritation and inhalation of spray
mist may cause respiratory irritation.
Do not disturb, sand or scrub, and avoid any peripheral dust. If you do not have professional expertise in the
handling/removal of asbestos sheeting, use a licensed asbestos removalist.
Refer to product labels, current FX Australia Safety Data Sheets or call FX Australia for detailed information.
Slippery when spilled
Restrict access to area until clean-up is completed
When cleaning up spills, use personal protection
Stop leak if safe to do so and contain spill with absorbent material such as sand, ver
iculite or other inert material
Prevent spill from entering waterways
Collect and dispose of spilled material according to local regulations
Wash away remnants
with liberal amounts of cold water.
Store in a cool, dry, well-ventilated place out of direct sunlight
Store away from strong acids and moisture
Keep containers closed
at all times and check regularly for spills.
Refer to State/Territory Land W
ste Management Authority: most authorities permit disposal at approved land waste sites.
FX Australia Pty Ltd | ABN: 75 089 071 385 | 86 Redfern Street, Wetherill Park NSW 2164 Australia
T +61 2 9725 5888 | F +61 2 9757 2688 | E
| W www.fxaustralia.com.au